Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: Bi2223/Ag alloy
Показаны 41−60 из 90	< предыдущая 1 2 3 4 5 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Inada R., Oota A., Nakamura Y., Shioiri T., Kurihara C., Machida T.

Fabrication and properties of Bi2223 tapes with high resistive barrier formed by the in situ oxidation method

Ключевые слова: HTS, Bi2223/Ag alloy, tapes, barriers, in-situ process, oxygenation treatments, fabrication

Physica C, 2008, v.468, N 15-20, p.1764-1766

Полный текст на Sci-Hub

Дополнительная информация

Osamura K., Otto A., Malozemoff A., Ochiai S., Okuda H., Shin J.K., Mukai Y., Matsubayashi H.

Dependence of critical current on sample length analyzed by the variation of local critical current bent of BSCCO superconducting composite tape

Ключевые слова: HTS, Bi2223/Ag, Bi2223/Ag alloy, tapes reinforced, critical current distribution, local distribution, mechanical properties, bending process, experimental results, critical caracteristics, length

Physica C, 2008, v.468, N 15-20, p.1775-1778

Полный текст на Sci-Hub

Дополнительная информация

Osamura K., Sugano M., Ochiai S., Okuda H., Shin J.K., Mukai Y.

The influence of tensile strain to critical current of Bi2223 composite tape

Ключевые слова: HTS, Bi2223/Ag, Bi2223/Ag alloy, tapes multifilamentary, mechanical properties, tensile tests, strain effects, critical current, local distribution, stress effects, n-value, experimental results, critical caracteristics

Physica C, 2008, v.468, N 15-20, p.1801-1804

Полный текст на Sci-Hub

Дополнительная информация

Fietz W.H., Heller R., Lietzow R.

Status of the High Temperature Superconductor Current Lead Development at the Research Centre Karlsruhe

Ключевые слова: HTS, current leads, ITER, Bi2223/Ag alloy, tapes, review, status

EUROPEAN SUPERCONDUCTIVITY NEWS FORUM, 2008, v., N 3, p.1-7

Полный текст на Sci-Hub

Дополнительная информация

Yang Y., Beduz C., March S.A., Ballarino A., Mess K.H.

Towards the Design of Power Switches Utilizing HTS Material

Ключевые слова: HTS, switches, trigger, YBCO, coated conductors, MgB2/Ni, specific heat, thermal conductivity, Bi2223/Ag alloy, tapes, quench properties, quench propagation, fabrication

EUROPEAN SUPERCONDUCTIVITY NEWS FORUM, 2008, v., N 3, p.1-7

Полный текст на Sci-Hub

Дополнительная информация

Dou S.X., Qin M.J., Liu H.K., Zeng R.

Phase transformation in Bi-2223/AgMg alloyed PIT tapes during different sintering processing and its influence on critical current density

Ключевые слова: HTS, Bi2223/Ag alloy, tapes, PIT process, sintering, fabrication, phase formation, critical current

Physica C, 2008, v.468, N 23, p.2305-2312

Полный текст на Sci-Hub

Дополнительная информация

Fietz W.H., Heller R., Schwarz M., Weiss K.-.

THERMAL CONDUCTIVITY MEASUREMENT OF BSCCO TAPES FOR CURRENT LEAD APPLICATIONS

Ключевые слова: HTS, Bi2223/Ag alloy, tapes, Bi2223/Ag alloy, thermal conductivity, temperature dependence, current leads, experimental results

AIP Conference Proceedings , 2008, v.986, N 1, p.445-450

Полный текст на Sci-Hub

Дополнительная информация

Oh S.S., Ha D.W., Okuda H., Ochiai S.(ochiai@iic.kyoto-u.ac.jp), Fujimoto M.

Sample-length dependence of the critical current of slightly and significantly bent-damaged Bi2223 superconducting composite tape

Ключевые слова: HTS, Bi2223/Ag alloy, composites, tapes multifilamentary, mechanical properties, bending process, current-voltage characteristics, critical current, n-value, damage mechanisms, experimental results, critical caracteristics, length

Superconductor Science Technology, 2007, v.20, N 8, p.800-809

Полный текст на Sci-Hub

Дополнительная информация

Kozak J., Janowski T., Kozak S., Kondratowicz-Kucewicz B., Wojtasiewicz G.

Analysis of Transformer Type Superconducting Fault Current Limiters

Ключевые слова: FCL inductive, HTS, Bi2223/Ag, tapes, coils solenoidal, Bi2223/Ag alloy, YBCO, coated conductors, comparison, design parameters, power equipment

IEEE Transactions Applied Superconductivity, 2007, v.17, N 2, p.1788-1790

Полный текст на Sci-Hub

Дополнительная информация

Yasuda K., Takahashi T., Mukoyama S., Torii S., Yagi M., Suzuki H., Ichikawa M.

Experimental Results of a 500 m HTS Power Cable Field Test

Ключевые слова: HTS, Bi2223/Ag alloy, tapes, cables cold-dielectric, long conductors, test results, cryostability, overloading conditions, power equipment

IEEE Transactions Applied Superconductivity, 2007, v.17, N 2, p.1680-1683

Полный текст на Sci-Hub

Дополнительная информация

Li Q., Yavuz M., Chen W.M.(wum_chen@yahoo.com)

Influence of Mechanical Vibration and Losses in Bi-2223 Coils on Thermal Expansion Properties of Bobbin Materials

Ключевые слова: HTS, Bi2223/Ag alloy, tapes, mechanical properties, mechanical losses, bobbins, thermal expansion, coils solenoidal, experimental results, power equipment

IEEE Transactions Applied Superconductivity, 2007, v.17, N 2, p.2414-2417

Полный текст на Sci-Hub

Дополнительная информация

Li C.S., Zhang P.X., Antonevici A., Mossang E.

Effects of compressive stress on the critical current of Bi-2223 tapes

Ключевые слова: HTS, Bi2223/Ag alloy, mechanical properties, compression, stress effects, tapes multifilamentary, critical current, experimental results, critical caracteristics

Physica C, 2007, v.463-465, N , p.882-884

Полный текст на Sci-Hub

Дополнительная информация

Oh S.S., Ochiai S., Okuda H., Shin J.K., Fujimoto M.

Local and overall critical current of Bi2223-composite tape under applied tensile and bending strains

Ключевые слова: HTS, Bi2223/Ag, Bi2223/Ag alloy, tapes multifilamentary, mechanical properties, tensile tests, bending process, current-voltage characteristics, critical current, n-value, critical current distribution, experimental results, critical caracteristics

Physica C, 2007, v.463-465, N , p.876-881

Полный текст на Sci-Hub

Дополнительная информация

Osamura K., Nakajima H., Oh S.S., Ochiai S., Doko D., Okuda H., Shin J.K., Fujimoto M.

Correlation between local and overall critical current of bent multifilamentary Bi2223/Ag tape

Ключевые слова: HTS, Bi2223/Ag, Bi2223/Ag alloy, tapes multifilamentary, mechanical properties, bending process, n-value, critical current distribution, experimental results, local distribution, critical caracteristics

Physica C, 2007, v.463-465, N , p.871-875

Полный текст на Sci-Hub

Дополнительная информация

Inada R., Oota A., Nakamura Y., Torii N., Shioiri T.

Effect of composition control of precursor and pre-oxidation of alloy sheath on Jc properties of Ag–Cu alloy sheathed Bi2223 tapes

Ключевые слова: HTS, Bi2223/Ag alloy, tapes, precursors, composition, oxygenation treatments, critical current density, microstructure, fabrication, critical caracteristics

Physica C, 2007, v.463-465, N , p.841-845

Полный текст на Sci-Hub

Дополнительная информация

Reinhard D.

DATA SHEET EHTS CURRENT LEAD APPLICATION TAPE

Ключевые слова: current leads, tapes, Bi2223/Ag alloy, critical current, temperature dependence, magnetic field dependence, mechanical properties, stress effects, bending process, resistivity, thermal conductivity, presentation, critical caracteristics

site EHTS, 2006, v., N , p.1-17

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: Bi2223/Ag alloy

Fabrication and properties of Bi2223 tapes with high resistive barrier formed by the in situ oxidation method

Dependence of critical current on sample length analyzed by the variation of local critical current bent of BSCCO superconducting composite tape

The influence of tensile strain to critical current of Bi2223 composite tape

Status of the High Temperature Superconductor Current Lead Development at the Research Centre Karlsruhe

Towards the Design of Power Switches Utilizing HTS Material

Phase transformation in Bi-2223/AgMg alloyed PIT tapes during different sintering processing and its influence on critical current density

THERMAL CONDUCTIVITY MEASUREMENT OF BSCCO TAPES FOR CURRENT LEAD APPLICATIONS

Sample-length dependence of the critical current of slightly and significantly bent-damaged Bi2223 superconducting composite tape

Analysis of Transformer Type Superconducting Fault Current Limiters

Experimental Results of a 500 m HTS Power Cable Field Test

A Statistical Model of I c Changes for Bending Bi-2223 Tapes

Low Boil-Off HTS Current Leads

The Bi-2223 Superconducting Wires With 200A-Class Critical Current

Microstructure Observations of Ag and Ag-Alloy Sheathed Bi2223 Tapes

Influence of Mechanical Vibration and Losses in Bi-2223 Coils on Thermal Expansion Properties of Bobbin Materials

Effects of compressive stress on the critical current of Bi-2223 tapes

Local and overall critical current of Bi2223-composite tape under applied tensile and bending strains

Correlation between local and overall critical current of bent multifilamentary Bi2223/Ag tape

Effect of composition control of precursor and pre-oxidation of alloy sheath on Jc properties of Ag–Cu alloy sheathed Bi2223 tapes

DATA SHEET EHTS CURRENT LEAD APPLICATION TAPE